Bituminous Flashing Tape is a Self -Adhesive tape made of a Butyl
& Bitumen Rubber Compund, Self Protected by re-enforced
Foil on one side and Adhesive side is protected by Release Film. Flashing Tape is a simple yet highly effective solution for
waterproofing, sealing and insulation.
Bitumen band sizes
Bitumen flash tape
0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3mm,4mm
2.5m, 5m,10m,20m or customized
White or customized
|2||Water impermeability||0.2 Mpa 120 min impermeable||--|
|3||Heat resistance°C||70 degree No slip, flowing.|
|4||Tensile force N/50mm ≥||150||150||130|
|5||Elongation at break,% ≥||250||250||450|
|6||Low temperature Flexibility|
|7||Peel strengthN/mm||Between membranes ≥||1.0|
and aluminum plate ≥
|8||Sheer strength N ≥||60||---|
|9||Stability after heating ≤||2%|
|10||Aging after artificial climate||Appearance||No crack, no bubble.|
|Tensile retention ,%||80|
|Lowtemperature Flexibility||-15°C, No crack.|
Trade items of product:
|Delivery Terms||FOB CFR, CIF, EXW|
|Payment Type||T/T. L/C, Paypal.|
|Sample||Small Pieces will be offered free.|
|Delivery Times||Within 7-10 days after receiving the deposit|
|Port of loading||Qingdao Port|
1) Safe, easy and fast installation, no naked flame, no binder, no
2) Excellent adhesive performance, self-healed property.
3) Anti-puncture, anti-tension, good elongation, anti-corrosion.
4) Good flexibility under low temperature.
5) Widened membranes can reduce loss.
1) Replacement or repair of flashing
2) Extensions, porches, window frames and chimneys
3)Caravans and conservatories
4) Seals capping bolts and roof ridges
5) Guttering down pipes, skylights
6) Sealing parapets, valley gutters
7) Roof repair of portable building
1) Application temperature should be between 5ºC to 45ºC
2) According to required length cut the pieces to the desired and
3) Place the pieces of membrane on the area to be covered and check
whether they match will be profile of the marked substrate.
4) Peel off the release film and carefully place the membrane so as
to ensure a minimum of 50mm overlap and then smoothen the membrane
from the center to the edges in order to drive out entrapped air.
It is easy to applied to provide instant seal.
Storage and Transportation:
1) Package in plastic bag.
2) Separate storage for different models.
3) Avoid direct sunshine, rain, keep ventilated.
4) Temperature should be below 45℃.
5) Do not piled more than 5 floors together if horizontal, 1 floor